BC Racing BR Series - BMW 1 SERIES E82 1M COUPE (11-12) (WIDE ARCH 3.0T)

BC Racing BR Series Coilovers – BMW E82 1M Coupe 2011-2012

Upgrade the suspension of your BMW E82 1M Coupe with BC Racing BR Series Coilovers, designed to provide a strong balance between performance, adjustability and road usability.

The BR Series is a versatile setup for drivers who want improved chassis control for fast-road and track use while retaining enough compliance for regular road driving.

For the wide-arch 3.0T BMW 1M Coupe, this application is available with two spring-rate configurations:

• 6.5 / 12kg/mm
• 10 / 14kg/mm

Available Spring Rates

Two spring-rate configurations are available for this application.

6.5 / 12kg/mm

• Front: 6.5kg/mm
• Rear: 12kg/mm

This is the more road-friendly option and is better suited to:

• Fast-road driving
• Mixed road and track use
• Daily-driven performance cars
• Drivers wanting strong chassis control without going excessively stiff

10 / 14kg/mm

• Front: 10kg/mm
• Rear: 14kg/mm

This is the firmer, more track-focused setup and is better suited to:

• Regular track days
• Higher-grip tyres
• More aggressive chassis setups
• Clubsport builds
• Drivers prioritising sharper response and body control

Balanced for Road & Track

The BR Series is designed to improve suspension control while retaining a usable level of ride quality.

Potential benefits include:

• Improved body control
• Sharper steering response
• Reduced pitch and roll
• Better cornering stability
• Greater confidence under repeated hard driving
• Adjustable setup for different driving conditions

Adjustable Ride Height

BC Racing BR Series Coilovers allow ride height to be adjusted to suit your preferred stance and intended use.

This gives greater control over:

• Vehicle height
• Wheel fitment
• Arch clearance
• Centre of gravity
• Overall stance

Ride height should always be set with sufficient suspension travel and clearance for safe operation.

Adjustable Damping

The BR Series provides damping adjustment, allowing the suspension response to be tuned around:

• Road conditions
• Tyre choice
• Driver preference
• Vehicle setup
• Track use

This gives significantly more flexibility than a fixed spring and damper setup.

Choosing the Right Spring Rate

Choose 6.5/12kg.mm if you want:

• Better road compliance
• Strong fast-road performance
• Occasional track capability
• A more versatile overall setup

Choose 10/14kg.mm if you want:

• Firmer chassis control
• More track-focused behaviour
• Better support for high-grip tyres
• A more aggressive suspension setup

If you're unsure which spring rate best suits your car, contact us before ordering and we can help select the most appropriate configuration.

Vehicle Fitment

Designed for:

• BMW E82 1M Coupe
• Model years 2011-2012
• Wide-arch 3.0T models

Exact fitment can vary by vehicle specification, so compatibility should always be confirmed before ordering.

Product Image & Configuration Note

Product images are generic and are intended for illustration purposes only.

The exact kit supplied can vary depending on vehicle application and selected configuration, including:

• Top mount design
• Camber adjustment
• Spring rates
• Rear mount configuration
• Additional hardware

If you have specific requirements such as top mounts, spring rates or a particular road or track setup, please contact The Rosso Corsa Collective before ordering so the correct specification can be confirmed.

Professional Installation Recommended

Professional installation is recommended.

After fitting coilovers, the vehicle should receive a full wheel alignment and geometry setup to ensure correct handling, tyre wear and suspension performance.

Explore More BMW 1M Suspension

BMW E8X 1 Series – Explore suspension, braking and performance upgrades.

BC Racing – Browse BC Racing coilovers and suspension upgrades.

Coilovers – Explore adjustable suspension kits for road and track use.

Suspension & Handling – Browse chassis, suspension and geometry upgrades.