BC Racing DS Series - Honda Integra DC2 (1993-2001) (Rear Eye)

BC Racing DS Series Coilovers – Honda Integra DC2 (1993–2001) Rear Eye

Upgrade the suspension of your Honda Integra DC2 with the BC Racing DS Series coilover kit, designed for drivers wanting a more performance-focused setup for fast-road, track day and motorsport use.

This application is specifically designed for Honda Integra DC2 models using the rear eye-type lower damper mounting, so the rear suspension mounting arrangement should be confirmed before ordering.

The DS Series uses BC Racing’s digressive damper technology to provide increased low-speed damping force for improved body control, steering response and chassis support while retaining greater compliance over sharper bumps and higher-speed suspension movements.

Digressive Damper Technology

The key difference with the BC Racing DS Series is its digressive damping profile.

Digressive damping provides stronger control during lower-speed suspension movements such as braking, acceleration, turn-in and weight transfer, helping the car remain flatter and more composed when driven hard.

At higher damper velocities, the damping curve becomes less aggressive, allowing the suspension to better absorb sharper bumps and surface changes without relying purely on excessively stiff spring rates.

Key features:

• DS Series digressive monotube damper design

• 30-way adjustable damping

• Independent ride-height adjustment

• Adjustable spring preload

• Improved body control under braking and cornering

• Sharper steering and chassis response

• DS-DA and DS-DH configurations available

• Rebuildable design

• Replacement components available

• Custom specification options available

• Rear eye-type application for Honda Integra DC2

Specification & Spring Rate Options

Available configurations include:

DS-DA – 9/4kg.mm – recommended spring rate for a balance of comfort and performance

DS-DH – 9/4kg.mm – alternate specification with adjustable pillowball top mount configuration

Both options use the same 9kg.mm front and 4kg.mm rear spring-rate setup, giving the Integra a strong balance between road usability, chassis control and more focused performance driving.

The main difference between the two configurations is the top mount specification rather than spring rate.

If you are unsure which version is most suitable for your Integra, please contact us before ordering.

DS-DA Configuration

The DS-DA configuration is supplied with aluminium front top mounts featuring pillowball centres.

Where the suspension design allows, the front top mounts can provide camber adjustment while also creating a more direct connection between the suspension and chassis.

Depending on the rear suspension application, aluminium rear top mounts with rubber centres may also be supplied, or the original rear mounting arrangement may be retained.

BC Racing product code:

A-34-DS-DA

DS-DH Configuration

The DS-DH configuration is supplied with aluminium camber-adjustable pillowball top mounts on the front where available, with pillowball mounting at the rear or no replacement rear top mount depending on the application.

This configuration is particularly suited to drivers wanting a more direct, track-focused mounting arrangement and increased geometry adjustment potential.

BC Racing product code:

A-34-DS-DH

Rear Eye Fitment

This listing is specifically for Honda Integra DC2 models using the rear eye-type lower damper mount.

Different suspension mounting arrangements can exist across applications, so the rear mounting type should be confirmed before ordering.

If you are unsure whether your Integra uses the correct rear eye configuration, please contact us with your vehicle details before placing your order.

Adjustable Ride Height & Damping

Ride height can be adjusted independently of spring preload, helping retain usable damper travel when lowering the vehicle.

The 30-way damping adjustment allows the suspension response to be fine-tuned according to road conditions, driver preference and intended use, from fast-road driving through to more demanding circuit work.

Vehicle Fitment

Designed for selected:

• Honda Integra DC2

• 1993–2001

• Rear eye-type damper mounting

Exact compatibility can vary depending on market, model and suspension specification.

Product Image & Specification Note

Product images are for illustration purposes only and may not show the exact specification supplied for every vehicle application.

BC Racing kits can vary depending on vehicle, spring rate, top mount configuration and other specification options. If you have any specific requirements, such as upgraded or alternative top mounts, spring rates or ride-height preferences, please contact us before ordering so we can confirm the most suitable configuration for your setup.

Fast Road & Track Performance

The BC Racing DS Series is particularly well suited to Integra owners wanting greater chassis control and feedback than a more conventional road-focused coilover setup.

The 9/4kg.mm spring rate provides a strong all-round balance for fast-road and track use, while the choice between DS-DA and DS-DH allows the top mount configuration to be matched more closely to the intended use of the vehicle.

Professional Installation Recommended

Professional installation is recommended.

A full four-wheel alignment should also be carried out after installation and once the final ride height has been set to ensure correct geometry, tyre wear and handling characteristics.

Where pillowball or adjustable top mounts are fitted, suspension geometry should be set by a competent specialist to suit the intended use of the vehicle.

Explore More

Honda Integra DC2 – Explore suspension, braking and performance upgrades for the Honda Integra DC2.

BC Racing – Browse adjustable coilover suspension systems for fast-road and track use.

Suspension & Handling – Explore coilovers, suspension arms, bushes and chassis upgrades.