Eibach Pro-Kit BMW 1er (E87) (E10-20-013-01-22) - BMW 1 Series E81 / E87
Tax included. Shipping calculated at checkout
Eibach Pro-Kit Lowering Springs – BMW 1 Series E81 / E87
Upgrade the stance and handling of your BMW 1 Series with the Eibach Pro-Kit, designed to provide a sportier chassis setup while retaining everyday ride comfort and usability.
The Pro-Kit uses progressive-rate springs engineered to work with the factory dampers, making it a popular first suspension upgrade for drivers who want improved body control and a lower ride height without moving to a full coilover system.
Eibach part number:
E10-20-013-01-22
Approximate Lowering
Eibach quotes approximately:
- Front: 30mm
- Rear: 25mm
These measurements are based on vehicles with standard, non-sport suspension.
If your BMW is already fitted with factory-lowered suspension, such as an M Sport chassis, the additional lowering achieved will be less than the figures quoted above.
Progressive Spring Design
The Eibach Pro-Kit uses progressive spring characteristics designed to improve chassis control while retaining a usable level of road comfort.
Potential benefits include:
- Lower centre of gravity
- Reduced body roll
- Reduced pitch under braking
- Improved steering response
- Sportier vehicle stance
- Improved chassis control
- Retained everyday usability
Designed to Work with OE Dampers
Eibach engineers the Pro-Kit to work with standard shock absorbers, making it suitable for owners who want a straightforward spring upgrade without replacing the complete suspension system.
Existing dampers should always be inspected during installation and replaced if worn.
Compatibility – Please Check Carefully
Eibach E10-20-013-01-22 is designed for specific BMW 1 Series E81 and E87 petrol models.
Compatible BMW E81 applications:
- BMW E81 116i
- BMW E81 118i
- BMW E81 120i
Compatible BMW E87 applications:
- BMW E87 116i
- BMW E87 118i
- BMW E87 120i
The available application data lists the E81 approximately from September 2004 to September 2012 and the E87 approximately from November 2003 to September 2012.
This kit should not be assumed to fit:
- 130i
- Diesel E81/E87 models
- Other E8x chassis variants
- Four-wheel-drive applications
Those vehicles may require a different Eibach part number.
Maximum Axle Loads
This kit is designed for vehicles up to:
- Front axle: 875kg
- Rear axle: 1060kg
These are maximum permissible axle loads and should not be exceeded.
Checking the axle-load figures on the vehicle identification plate is strongly recommended before ordering, particularly where multiple Eibach kits are available for the same chassis.
Important Fitment Notes
Eibach lists fitting notes A, 18, 20 and 68 for this application.
The relevant restrictions include:
- Suitable for vehicles without self-levelling suspension
- Excludes four-wheel-drive vehicles
- Additional axle-load considerations apply when towing
Compatibility should therefore be checked using both the exact model and the vehicle's permissible axle loads.
How This Differs from E10-20-013-02-22
Although both kits are listed for the BMW E81/E87 platform, they are intended for different vehicle weights and engine variants.
E10-20-013-01-22:
- 116i
- 118i
- 120i
- Maximum front axle load: 875kg
- Maximum rear axle load: 1060kg
E10-20-013-02-22:
- 130i
- 116d
- 118d
- 120d
- 123d
- Higher permissible front axle load
Selecting the correct kit is important because Eibach calibrates the springs around the vehicle's weight and axle loads.
Spring Identification
The individual spring references included in this kit are:
- Front: F11-20-013-01-VA
- Rear: F11-20-013-01-HA
Vehicle Fitment Summary
Eibach part number:
E10-20-013-01-22
Compatible models:
- BMW E81 116i
- BMW E81 118i
- BMW E81 120i
- BMW E87 116i
- BMW E87 118i
- BMW E87 120i
Approximate lowering:
- Front: 30mm
- Rear: 25mm
Maximum axle loads:
- Front: 875kg
- Rear: 1060kg
Restrictions:
- Vehicles without self-levelling suspension
- Excludes four-wheel-drive models
If you're unsure whether this is the correct Pro-Kit for your BMW, contact The Rosso Corsa Collective with your registration, exact model and axle-load figures before ordering.
Professional Installation Recommended
Professional installation is recommended.
Following installation, the vehicle should receive a full wheel alignment to ensure correct geometry, handling and tyre wear.
Explore More BMW 1 Series Suspension
BMW 1 Series E8x – Explore suspension, braking and performance upgrades for E81, E82, E87 and E88 models.
Eibach – Browse Eibach lowering springs, coilovers and suspension upgrades.
Lowering Springs – Explore performance lowering spring kits.
Suspension & Handling – Browse suspension, chassis and geometry upgrades.