Eibach Pro-Kit BMW 1er (E87) (E10-20-013-02-22)

Eibach Pro-Kit Lowering Springs – BMW 1 Series E87

Improve the stance and handling of your BMW 1 Series E87 with the Eibach Pro-Kit, a progressive lowering spring package developed to provide a sportier driving experience while retaining everyday usability.

Eibach Pro-Kit springs are designed to work with the factory dampers and provide a lower centre of gravity, improved body control and a more purposeful appearance without requiring a full coilover conversion.

Approximate Lowering

For Eibach part number E10-20-013-02-22, the quoted lowering is approximately:

• Front: 30mm
• Rear: 25mm

These figures are based on vehicles with standard suspension.

If your BMW is fitted with M Sport or another factory sports suspension package, the actual additional lowering will be less because the vehicle already sits lower than a standard chassis.

Progressive Spring Design

The Eibach Pro-Kit uses a progressive spring design intended to improve handling while maintaining road comfort.

Potential benefits include:

• Lower centre of gravity
• Reduced body roll
• Reduced pitch under braking
• Improved chassis response
• Sportier appearance
• Retained everyday usability

Designed for OE Dampers

The Pro-Kit is engineered to work with standard OE-style dampers, making it a popular upgrade for owners who want improved handling and stance without moving to a complete coilover system.

Existing dampers should always be inspected for wear during installation and replaced if necessary.

Compatibility – Please Check Carefully

Eibach part number E10-20-013-02-22 is listed for specific BMW 1 Series E81 and E87 variants rather than every model in the range.

Compatible E87 applications listed for this kit include:

• BMW E87 130i
• BMW E87 116d
• BMW E87 118d
• BMW E87 120d
• BMW E87 123d

The same part number is also listed for equivalent E81 versions of these models.

This means the kit should not be assumed to fit other E87 variants such as petrol 116i, 118i or 120i models unless specifically confirmed against Eibach application data.

Maximum Axle Loads

This kit is designed for vehicles up to the following permissible axle loads:

• Front axle: 920kg
• Rear axle: 1060kg

The vehicle's axle weights should be checked against its VIN / identification plate before ordering, as axle load is an important part of confirming correct spring compatibility.

Vehicle Requirements

The available application data also lists this kit for vehicles without self-levelling / level control.

Because BMW specification can vary by engine, model year and factory suspension package, we strongly recommend confirming:

• Exact model and engine
• Model year
• Front axle load
• Rear axle load
• Standard or M Sport suspension
• Presence of any self-levelling suspension system

before ordering.

If you're unsure, contact The Rosso Corsa Collective with your vehicle details and we can help confirm compatibility.

Kit Components

Eibach lists the following spring references within this kit:

• Front springs: F11-20-013-02-VA
• Rear springs: F11-20-013-01-HA

Professional Installation Recommended

Professional installation is recommended.

After fitting lowering springs, the vehicle should receive a wheel alignment to ensure correct handling and tyre wear.

Explore More BMW 1 Series Suspension

BMW 1 Series E8x – Explore suspension, braking and performance upgrades for E81, E82, E87 and E88 models.

Eibach – Browse Eibach lowering springs and suspension upgrades.

Lowering Springs – Explore performance lowering spring kits.

Suspension & Handling – Browse suspension, chassis and geometry upgrades.