Eibach Pro-Street Coilover (PSS65-20-013-01-22) - BMW 1 Series E81 / E87
Tax included. Shipping calculated at checkout
Eibach Pro-Street-S Coilovers – BMW 1 Series E81 / E87
Upgrade your BMW 1 Series with the Eibach Pro-Street-S Coilover Kit, combining adjustable ride height with a complete matched spring and damper package for drivers wanting a more focused suspension setup.
Unlike a lowering spring kit, Pro-Street-S replaces the dampers as part of the suspension package and allows the ride height to be adjusted within the approved range.
Eibach part number:
PSS65-20-013-01-22
Adjustable Ride Height
For BMW E81 and E87 applications, Eibach lists an approximate adjustment range of:
- Front: 35-65mm lowering
- Rear: 35-65mm lowering
The front axle uses a threaded strut for height adjustment, while the rear uses a separate height-adjustable unit.
Quoted lowering figures are based on vehicles with standard, non-sport suspension.
Cars already fitted with factory-lowered suspension, such as certain M Sport models, will achieve less additional lowering than the figures quoted above.
Complete Coilover Suspension System
The Pro-Street-S combines matched springs and dampers in a height-adjustable suspension package.
Key features include:
- Adjustable ride height
- Matched Eibach springs and dampers
- Stainless steel coilover construction
- Height-adjustable front and rear suspension
- Sport-focused handling characteristics
- Suitable for performance road use
- Certified adjustment range
Eibach describes the Pro-Street-S as offering a sporty but comfortable character during normal driving, becoming progressively more controlled as suspension loads increase.
Stainless Steel Construction
The Pro-Street-S uses a corrosion-resistant stainless steel design, helping protect the threaded adjustment system during year-round road use.
As with any adjustable suspension, keeping the threads clean and correctly maintained is recommended to preserve future ride-height adjustment.
Compatibility – Please Check Carefully
Eibach PSS65-20-013-01-22 is listed for the following BMW 1 Series E81 and E87 models:
BMW 1 Series E81:
- 116i
- 118i
- 120i
- 130i
- 116d
- 118d
- 120d
- 123d
BMW 1 Series E87:
- 116i
- 118i
- 120i
- 130i
- 116d
- 118d
- 120d
- 123d
For the E81 application, Eibach lists approximately September 2004 to September 2012.
For the E87 application, Eibach lists approximately November 2003 to September 2012.
Additional BMW Applications
PSS65-20-013-01-22 is also listed for selected other BMW models, including certain:
- BMW E82 1 Series Coupe models
- BMW E90 3 Series models
- BMW E92 3 Series Coupe models
Compatibility, axle-load limits and lowering ranges can differ between chassis, so this part number should always be checked against the exact vehicle before ordering.
Maximum Axle Loads
For the E81/E87 application, the maximum permissible axle loads are:
- Front axle: 945kg
- Rear axle: 1070kg
Your vehicle must not exceed these limits.
Checking the axle-load figures on the vehicle identification plate is one of the most reliable ways of confirming the correct Eibach suspension application.
Important Fitment Notes
Eibach lists fitting notes:
- A
- 18
- 20
- 24
- 25
- 45
- 160
These indicate, among other things:
- Suitable for vehicles without self-levelling suspension
- Not suitable for four-wheel-drive models
- Front ride height adjusted through a threaded strut
- Rear ride height adjusted through a separate height-adjustable unit
- Wheel spacers may be required for sufficient wheel-to-suspension clearance
- Additional OE components may be required depending on application
- Replacement components must correspond with the approved kit documentation
Eibach also specifies that vehicle-specific approval documentation and component identification should be checked before installation.
Fixed Damping Setup
The Pro-Street-S is primarily designed around ride-height adjustment rather than user-adjustable damping.
Eibach matches the spring and damper characteristics as part of the complete kit, providing a pre-engineered suspension package rather than requiring the driver to tune damper settings manually.
This makes it particularly suitable for drivers who want a complete performance suspension setup without the additional complexity of independently adjustable damping.
Designed for Fast-Road Performance
The Pro-Street-S is well suited to:
- Fast-road driving
- Performance-focused daily cars
- Lowered road builds
- Occasional track use
- Drivers wanting adjustable ride height
- Owners wanting a complete matched suspension package
The ability to alter ride height provides greater flexibility for stance, wheel fitment and chassis setup than a fixed lowering spring kit.
Vehicle Fitment Summary
Part number:
PSS65-20-013-01-22
BMW E81 / E87 engines:
- 116i
- 118i
- 120i
- 130i
- 116d
- 118d
- 120d
- 123d
Maximum axle loads:
- Front: 945kg
- Rear: 1070kg
Approximate E81/E87 lowering range:
- Front: 35-65mm
- Rear: 35-65mm
Restrictions:
- Vehicles without self-levelling suspension
- Excludes four-wheel-drive models
If you are unsure whether this kit is correct for your BMW, please contact The Rosso Corsa Collective with your exact model, registration and axle-load figures before ordering.
Professional Installation Recommended
Professional installation is recommended.
After fitting coilovers, the vehicle should receive a full wheel alignment and geometry setup to ensure correct handling, tyre wear and suspension performance.
Wheel and tyre clearance should also be checked throughout the full steering and suspension range, particularly when running aftermarket wheels, tyres or spacers.
Explore More BMW 1 Series Suspension
BMW 1 Series E8x – Explore suspension, braking and performance upgrades for E81, E82, E87 and E88 models.
Eibach – Browse Eibach lowering springs, coilovers and suspension upgrades.
Coilovers – Explore adjustable suspension systems for road and track use.
Suspension & Handling – Browse suspension, chassis and geometry upgrades.