MMX Air intake kit | Mini F56

 

MMX Air Intake Kit – MINI F56 Cooper, Cooper S & JCW

Improve airflow, turbo response and induction sound on your MINI F56 with the MMX Air Intake Kit.

Designed specifically for pre-LCI F-Series MINI models, this high-performance induction system replaces the restrictive factory airbox arrangement with a freer-flowing cone filter setup while retaining the original cold-air feed and factory mounting points.

The kit includes a dedicated heat shield to help isolate the filter from hot engine-bay air, while MMX’s direct-fit design allows the intake to bolt into place without cutting or permanent modification.

Suitable for standard and tuned MINI Cooper, Cooper S and John Cooper Works models, the MMX intake is designed to provide a noticeable increase in induction noise, sharper turbo response and improved airflow through the intake system.

Why Upgrade the Factory Intake?

The factory MINI intake system is designed around a balance of refinement, packaging, filtration and production cost.

For performance-focused driving, a higher-flow intake system can reduce restriction before the turbocharger and allow the engine to breathe more freely.

The MMX Air Intake Kit is designed to provide:

• Improved airflow
• Sharper throttle response
• Improved turbo spool
• Increased induction sound
• More audible turbo noise
• Reduced intake restriction
• Improved performance potential
• Cleaner engine-bay appearance

Key Features

• MMX high-performance air intake kit
• Designed for pre-LCI MINI F-Series applications
• Suitable for MINI Cooper
• Suitable for MINI Cooper S
• Suitable for MINI John Cooper Works
• High-flow cone air filter
• Precision heat shield
• Retains factory cold-air feed
• Compatible with all MAF sensor types
• Direct fitment using factory mounting points
• Uses original rubber mounting points
• No cutting required
• No permanent modifications
• Improved airflow
• Sharper turbo response
• Enhanced throttle response
• Increased induction sound
• Suitable for standard and tuned vehicles
• Complete installation hardware included
• Fitting instructions included
• Compatible with factory intake resonator
• Works particularly well with MMX Resonator Delete Pipe
• Works particularly well with MMX Silicone Intake Hose
• MMX part number MMR11-1401

High-Flow Cone Filter

At the heart of the MMX intake system is a high-flow cone filter designed to reduce restriction compared with the standard enclosed filter arrangement.

The exposed cone design provides a larger effective filtration area and allows the turbocharger to draw air more freely.

This can contribute to:

• Improved airflow
• Sharper turbo spool
• Enhanced throttle response
• Increased induction sound

Dedicated Heat Shield

A common concern with open-cone intake systems is the possibility of drawing warmer air from inside the engine bay.

MMX addresses this with a dedicated heat shield positioned around the filter.

The heat shield creates a barrier between the intake filter and surrounding engine-bay heat, helping maintain lower intake temperatures during normal and performance driving.

Retains the Factory Cold-Air Feed

The MMX intake retains and makes use of the original MINI cold-air feed.

Rather than abandoning the factory ducting, MMX reroutes the cold-air supply around the high-flow cone filter.

This allows the intake to benefit from:

• Cooler incoming air
• Factory front-end ducting
• Improved filter airflow
• Better temperature management

Compatible with All MAF Sensor Types

MMX specifically designed the intake to work with the different MAF sensor variations found across the compatible F-Series MINI range.

This means the kit can accommodate all supported MAF configurations without requiring improvised adapters or modifications.

Improved Turbo Response

Reducing restriction before the turbocharger can help it draw air more efficiently.

MMX highlights sharper turbo spool and improved throttle response as key benefits of the intake system.

The effect can become more noticeable on tuned cars where airflow demand is significantly greater than standard.

Increased Induction Sound

One of the most noticeable changes after fitting the MMX intake is the increase in induction and turbo sound.

The factory airbox is heavily designed around acoustic refinement.

Replacing it with the MMX cone filter arrangement allows more of the engine’s natural intake character to be heard.

Depending on the rest of the car’s setup, you may notice:

• Louder induction noise
• More turbo spool
• More audible airflow
• Increased turbo character under acceleration

Ideal for Tuned MINIs

The MMX intake is particularly well suited to modified MINI builds.

As boost pressure and engine output increase, the engine requires greater airflow.

The intake can therefore complement:

• Stage 1 tuning
• Stage 2 tuning
• Upgraded intercoolers
• Chargepipe upgrades
• Performance exhaust systems
• Turbo upgrades
• Supporting cooling modifications

MMX states that the performance gains become particularly noticeable on tuned vehicles.

Suitable for Standard Cars

The intake can also be fitted to a completely standard car.

Even without tuning, owners can benefit from:

• Increased induction sound
• Sharper throttle response
• Improved turbo acoustics
• Cleaner engine-bay appearance

This makes it a popular first performance modification.

Compatible with the Factory Resonator

The MMX intake can be fitted while retaining the original factory intake resonator.

This means owners can upgrade the airbox first and then add further induction components later if required.

Best Paired with the MMX Resonator Delete Pipe

MMX specifically recommends pairing the intake with its Resonator Delete Pipe for maximum sound and airflow improvement.

The resonator delete removes another restrictive section of the standard intake path and allows more turbo sound to be heard.

Together, the two upgrades provide a much more complete intake system.

Best Paired with the MMX Silicone Intake Hose

The MMX Silicone Intake Hose replaces the corrugated factory intake hose with a smoother-flowing silicone alternative.

Combining:

• MMX Air Intake Kit
• MMX Resonator Delete Pipe
• MMX Silicone Intake Hose

creates a much more comprehensive induction package for compatible MINI F-Series applications.

Direct-Fit Installation

The MMX intake is designed to bolt directly onto the original vehicle mounting points.

It uses the factory rubber mounts and requires no cutting or complicated fabrication.

This provides:

• Straightforward installation
• OEM-style fitment
• No permanent vehicle modification
• Easy return to standard if required

Complete Installation Kit

MMX supplies the intake as a complete package with the hardware required for installation.

Fitting instructions are also included.

This helps avoid the need to source additional brackets, adapters or mounting hardware separately.

MINI F56 Cooper

The MMX Air Intake Kit is suitable for applicable pre-LCI MINI F56 Cooper models using the 1.5-litre turbocharged engine.

MMX specifically lists the Cooper 1.5T within its current product application.

MINI F56 Cooper S

The intake is also suitable for pre-LCI MINI F56 Cooper S applications using the 2.0-litre turbocharged engine.

For tuned Cooper S builds, the intake works particularly well alongside intercooler and chargepipe upgrades.

MINI F56 John Cooper Works

Applicable pre-LCI F56 John Cooper Works models are also supported.

For JCW applications, the additional intake and turbo sound provides a particularly noticeable change in driving character.

Wider F-Series MINI Fitment

MMX currently lists compatibility across:

• MINI F55
• MINI F56
• MINI F57

Model years:

• 2014–2017
• Pre-LCI

Model variants:

• MINI Cooper
• MINI Cooper S
• MINI John Cooper Works

MMX’s current product description references B38 1.5T Cooper and B48 2.0T Cooper S / JCW applications.

Please confirm exact engine and MAF configuration before ordering.

Compatibility

Primary applications include:

• MINI F56 Cooper
• MINI F56 Cooper S
• MINI F56 John Cooper Works

Also suitable for compatible:

• MINI F55
• MINI F57

Fitment:

• 2014–2017 pre-LCI
• B38 1.5T
• B48 2.0T

Please confirm the exact vehicle and engine specification before ordering.

What's Included?

The MMX Air Intake Kit includes:

• High-flow cone air filter
• Precision heat shield
• Intake mounting hardware
• Required brackets and fittings
• Fitting instructions

Supplied as a complete induction kit.

2014-2017 (Pre LCI)

Explore More MINI F56 Performance Upgrades

Looking to improve your MINI further? Explore our range of induction and performance components.

MINI F56 Parts – Browse induction, cooling, suspension and performance upgrades for MINI F56 models.

MMX Performance – Explore MMX intake, cooling, engine and chassis upgrades.

Induction – Browse intake kits, panel filters, resonator delete pipes and silicone intake hoses.

Intercoolers – Explore charge-air cooling upgrades for standard and tuned MINI builds.