Stjarnagloss Snö-PH Neutral Snow Foam Pre-Wash
Tax included. Shipping calculated at checkout
Stjarnagloss Snö pH Neutral Snow Foam
Give your vehicle a safer, more effective pre-wash with Stjarnagloss Snö, a dense pH-neutral snow foam designed specifically for regular maintenance washing.
Snö produces a thick, clingy layer of foam with excellent dwell time, helping loosen dust, light dirt and road contamination before you make physical contact with the paintwork.
Its mild pH-neutral formula is particularly well suited to protected vehicles, delivering useful cleaning performance without unnecessarily stripping existing waxes, sealants or coatings.
For regular maintenance washes where maximum chemical strength is not required, Snö provides an excellent balance of cleaning power, paint safety and value.
Why Choose Stjarnagloss Snö?
A snow foam should help remove as much loose contamination as possible before the wash mitt touches the paint.
Snö is designed to provide:
- Thick, dense foam
- Long dwell time
- Effective light dirt removal
- pH-neutral cleaning
- Safe maintenance of protected paint
- Excellent lubrication and slip
- Economical dilution
- Straightforward pressure-washer application
Key Features
- pH-neutral snow foam
- Designed for regular maintenance washing
- Thick, dense foam
- Excellent dwell time
- Helps remove dust and light road dirt
- Mild enough for protected vehicles
- Helps preserve waxes and sealants
- Suitable for coated vehicles
- Provides useful cleaning slip
- Designed for pressure-washer snow foam cannons
- Best results with 130bar+ pressure washer
- Approximately 20 litres or more of foam mixture per 1L bottle
- Enough for roughly 30–40 average-sized vehicles
- Ideal for lightly soiled cars
pH-Neutral Formula
Snö uses a pH-neutral cleaning formula.
This makes it particularly suitable for regular maintenance washing where preserving existing protection is important.
Aggressive or strongly alkaline snow foams can reduce the lifespan of:
- Waxes
- Sealants
- Hydrophobic protection
- Some detailing finishes
Snö is designed to clean without unnecessarily removing these layers.
Ideal for Protected Cars
If your vehicle already has a wax, sealant or coating applied, Snö is an excellent maintenance option.
It helps remove light contamination while leaving the underlying protection largely unaffected.
This makes it useful for cars protected with:
- Traditional wax
- Synthetic sealant
- Nano sealant
- Ceramic coating
- Hydrophobic protection products
Thick, Dense Foam
Snö is designed to produce a dense layer of foam that clings to the vehicle.
The thicker the foam remains on the surface, the longer the cleaning solution can work on contamination before rinsing.
This extended dwell time helps loosen:
- Dust
- Light road grime
- Loose dirt
- Everyday contamination
Excellent Dwell Time
Dwell time is one of the most important characteristics of a snow foam.
A product that runs immediately from the vehicle has less time to work.
Snö's dense consistency allows it to remain on vertical and horizontal surfaces for longer, giving the cleaning agents more opportunity to loosen dirt.
Helps Make Contact Washing Safer
Loose contamination left on the vehicle can become trapped between the wash mitt and paint.
Dragging this contamination across the surface can contribute to:
- Swirl marks
- Fine scratches
- Wash marring
Using Snö first helps remove more dirt before physical contact, reducing the amount of contamination present during the main wash.
Adds Useful Slip
Snö also provides some lubrication or slip as it works.
This helps loosened dirt move away from the paint rather than remaining tightly bonded to the surface.
The result is a cleaner car before the contact wash begins.
Apply from the Bottom Upwards
Stjarnagloss recommends applying Snö from the bottom of the vehicle upwards.
This gives the dirtiest lower sections of the car more dwell time.
Lower areas commonly collect more:
- Road grime
- Mud
- Traffic film
- General contamination
Applying to these sections first allows the foam to work there for longer.
Best Used with a Snow Foam Cannon
For optimum results, Snö should be applied using a professional snow foam cannon connected to a pressure washer.
Stjarnagloss recommends a pressure washer capable of approximately 130bar or more for best performance.
A suitable setup helps produce:
- Thicker foam
- More even coverage
- Better dwell time
- More efficient product use
Lower-Powered Pressure Washers
Lower-powered machines such as some Kärcher K2 models can still be used.
However, you may need:
- A higher-quality snow foam cannon
- A stronger product mixture
- More careful lance adjustment
to achieve the desired foam consistency.
Excellent Value
A 1-litre bottle of Snö can produce approximately 20 litres or more of usable snow foam mixture.
Stjarnagloss estimates this is sufficient to coat roughly:
- 30–40 average-sized cars
Actual usage will depend on:
- Vehicle size
- Foam cannon
- Pressure washer
- Dilution strength
- Amount of foam applied
Ideal for Regular Maintenance
Snö works particularly well as part of a regular wash routine.
It is designed for lightly soiled vehicles rather than extreme contamination.
Ideal situations include:
- Weekly washing
- Fortnightly maintenance
- Protected daily drivers
- Show cars
- Regularly detailed vehicles
Snö vs Snö X
Stjarnagloss Snö
Best for:
- Regular maintenance
- Light contamination
- Protected vehicles
- pH-neutral cleaning
- Safer repeated use
Stjarnagloss Snö X
Best for:
- Heavy grime
- Winter contamination
- Neglected vehicles
- Stronger chemical cleaning
- Intensive pre-washing
If the vehicle is regularly maintained and already protected, Snö is generally the better choice.
Snö vs Först
Först is a stronger citrus pre-cleaner designed to tackle more significant grime and traffic film.
Snö focuses on:
- Thick foam
- Longer dwell
- pH-neutral cleaning
- Protection-friendly maintenance
For heavily contaminated vehicles, Först may be used before Snö or a stronger pre-cleaning product may be more appropriate.
How to Use Stjarnagloss Snö
- Add Snö to your snow foam cannon at the required dilution.
- Top up with water.
- Connect to a suitable pressure washer.
- Apply the foam from the bottom of the vehicle upwards.
- Allow the product to dwell.
- Do not allow it to dry on the surface.
- Rinse thoroughly with clean water.
- Continue with your normal contact wash.
Ideal Before Bubblor Shampoo
For a complete Stjarnagloss maintenance wash, Snö works particularly well before Bubblor Shampoo.
Snö handles the pre-wash stage, while Bubblor provides the contact wash.
This creates a simple two-stage cleaning process:
- Snö – Remove loose contamination.
- Bubblor – Safely contact wash the remaining dirt.
What's Included?
Each quantity includes:
- 1x Stjarnagloss Snö pH Neutral Snow Foam
Available size options should be selected when ordering.
Explore More Exterior Car Care
Looking to complete your wash routine? Explore our wider detailing range.
Stjarnagloss – Browse premium exterior and interior car care products.
Exterior Car Care – Explore snow foams, pre-washes, shampoos and protection products.